3D Printing for Lunar Habitats

[rhoenix]

OH YES.

Foster + Partners is part of a consortium set up by the ESA to explore the possibilities of 3D printing to construct lunar habitations. Addressing the challenges of transporting materials to the moon, the study is investigating the use of lunar soil, known as regolith, as building matter.

The practice has designed a lunar base to house four people, which can offer protection from meteorites, gamma radiation and high temperature fluctuations. The base is first unfolded from a tubular module that can be transported by space rocket. An inflatable dome then extends from one end of this cylinder to provide a support structure for construction. Layers of regolith are then built up over the dome by a robot-operated 3D printer to create a protective shell.

To ensure strength while keeping the amount of binding “ink” to a minimum, the shell is made up of a hollow closed cellular structure similar to foam. The geometry of the structure was designed by Foster + Partners in collaboration with consortium partners – it is groundbreaking in demonstrating the potential of 3D printing to create structures that are close to natural biological systems.

Simulated lunar soil has been used to create a 1.5 tonne mockup and 3D printing tests have been undertaken at a smaller scale in a vacuum chamber to echo lunar conditions. The planned site for the base is at the moon’s southern pole, where there is near perpetual sunlight on the horizon.

The consortium includes Italian space engineering firm Alta SpA, working with Pisa-based engineering university Scuola Superiore Sant’Anna. Monolite UK supplied the D-Shape™ printer and developed a European source for lunar regolith stimulant, which has been used for printing all samples and demonstrators.

Xavier De Kestelier, Partner, Foster + Partners Specialist Modelling Group:
“As a practice, we are used to designing for extreme climates on earth and exploiting the environmental benefits of using local, sustainable materials – our lunar habitation follows a similar logic. It has been a fascinating and unique design process, which has been driven by the possibilities inherent in the material. We look forward to working with ESA and our consortium partners on future research projects.”

So. Apparently the European Space Agency is strongly considering 3D printing as a valuable part of frontier extraplanetary habitation. The awesome part is that unless I missed something, the very same strategy would work just fine for a Mars base, or even an asteroid base.

[rhoenix]

The first real lunar base should look literally out-of-this-world cool. Maybe it will look as spacey as Apple's new campus, or Virgin’s Spaceport America. Foster + Partners, the architectural firm to dream up those ideas, has a new lunar-base concept for the European Space Agency. (Let's hope it is better-executed than Las Vegas' beleaguered Harmon Hotel.)

It may never be built, but it could be a feasible design for future moon base planning, according to ESA. Foster + Partners designed the new moon shelter concept based on a 3-D printer--which in some ways is liberating, because the machines can theoretically make anything. Building a lunar base would be a lot easier with a 3-D printer, because you could just scoop up material from the moon’s surface and melt it together. No massive cargo ships hauling rebar required--and that would mean less fuel, less risky rocket launches, and maybe even lower costs.

The architects designed a weight-bearing catenary dome, which has cellular structured walls to shield against radiation and micrometeoroids. Astronauts would live in inflatable habitats nestled beneath the dome. Domes are extremely structurally sound and can cover large spaces without support beams--a helpful design that would allow for space-maximizing open floor plans. The current design can house four people.

First, a cylindrical base would fly to the moon on a rocket, unfolding from a tubular canister when it arrives. The dome inflates from this cylinder, which you can see in greater detail in the slideshow. Then robotic rovers cover up the dome with regolith, sintering it together with a 3-D printer to create a hard shell. The shell is made from hollow cellular structured walls (which the designers compare to bird bones), and it would be strong but incredibly lightweight. It would also guard inhabitants against cosmic radiation and temperature fluctuations.

The team already produced a prototype wall, which weighs 1.5 metric tons and is made from simulated lunar regolith. It was printed with the help of 3-D printing mastermind Enrico Dini and his D-shape printer. By chance, they had a great source for very moon-like material: Basaltic rock from a volcano in central Italy, which bears a 99.8 percent resemblance to lunar soil, Dini said.

ESA’s General Studies Programme, which funds research into new topics, led the charge on this study. Next the team wants to examine how to control certain other factors, like potentially hazardous very fine lunar dust and the moon’s extreme temperature swings.

Yes, this is indeed a thing.

[Josh]

Yes!

YES YES YES YES!

The future continues to come together!

[Dark Silver]

I just want a affordable 3D Printer.

[Josh]

Give time, the price curve always ramps it down.

The bigger concern is the cost of the feedstock for the beasties, from what I've heard. That's going to need to ramp down too.